PETALUMA, Calif. - eTradeWire -- Kval, a U.S. manufacturer of door machinery since 1947, today introduced the Stinger, a high-production automatic stop stitcher for interior jambs. The Stinger fastens door stop to jambs and headers in one continuous, flow-through pass, giving pre-hung door shops more output and a more consistent reveal with less handling.

How it works
The operator sets the jamb and stop against the end points on the shelf and presses the foot pedal. The Stinger aligns the two parts, applies the programmed fastening pattern and power-feeds the assembly through the machine. Finished assemblies exit automatically onto a racking system, staged in order and ready to move to a cart.

The machine references the top of the jamb for alignment, so stop placement stays consistent even when jambs vary.

More on eTradeWire News

• The Truth, The Journey Within Makes Its Worldwide Premiere in Beverly Hills
• Affinius Capital Appoints Michael Jordan as Managing Director of Housing Portfolio Management
• Westland Consultant Releases Free Speaker Playbook
• Evluma's RoadMax Edge Roadway Luminaires Earn DarkSky Approved Status
• Handeholder Introduces the Cooling Pocket Accessory for Overheating Tablets

Built for throughput
- Up to 8 jambs per minute, per side. The left and right sides run independently and at the same time, each with its own operator.
- No changeover. Different jamb and header lengths, and square-cut or mitered stops, need no machine adjustment.
- Quick pattern changes. A touch screen sets fastener spacing, machine settings, diagnostics and troubleshooting.
- Fast reveal conversions between 1-3/8" and 1-3/4" doors.
- Low fastener indicator warns the operator before fasteners run out.
- Brad nailers or staplers, to match each shop's fastening standard.

"Stop stitching is one of the most repetitive steps in a pre-hung line, and it's where small inconsistencies show up in the finished door. We built the Stinger so a shop can run two operators side by side, switch jamb lengths and stop styles without touching the machine, and get the same reveal every time."
— Nate Kvalheim, President, Kval Inc.

More on eTradeWire News

• Livingston County Professional Lawn Care Company Promotes Winterization
• Alumi-Span Makes Dock Installation Easy
• 5 Reasons Ocean County Residents Trust Dasti & Staiger With Their Legal Matters
• Butler Pet Care Now Accepting New Clients for Professional Pet Drop-In Visits in Suwanee, Buford
• Palapa Tours Looks to Vancouver Island and Mainland BC for Next Generation of Tourism Entrepreneurs

Specifications
- Jamb width: 3.5" to 10"
- Jamb length: 18" minimum, no maximum
- Jamb thickness: 0.375" to 1.75" (2.25" with stop)
- Stop width: 0.75" to 2"
- Stop thickness: 0.313" to 0.750"

Accepts flat or profiled stops with square or mitered ends. Controls: touch screen and foot pedal.

Availability
The Stinger is available to order now. It runs on 460V three-phase power as standard, with low-voltage (208/230V) and 600V transformer options. For pricing, lead time or a demonstration, contact Kval sales at (800) 553-5825 or sales@kvalinc.com, or visit http://kvalinc.com/machines/stinger.

About Kval
Founded in 1947, Kval designs and builds door machinery for pre-hung door, millwork and door manufacturing operations. The company is headquartered in Petaluma, California, with a second facility in Hutto, Texas. Learn more at kvalinc.com.